Original PubMed abstract — English. No translation or clinical interpretation.
Authors
Jenny Buhl; Matej Par; Andrea Gubler; Tobias T Tauböck
Publication details
Materials (Basel, Switzerland) · 2026 · Vol. 19 · No. 6
Publication date (as recorded): 2026-03-10
PMID: 41900565
Abstract (original)
With the growing clinical use of ion-releasing resin composites, their repairability has become an important consideration in minimally invasive restorative dentistry. Therefore, this study investigated the repair bond strength of a universal composite restorative to commercially available and experimental ion-releasing resin composite materials. Specimens ( = 8 per group) were produced from three commercially available ion-releasing composite materials (ACTIVA BioACTIVE-RESTORATIVE, Cention Forte, Beautifil II), one experimental ion-releasing resin composite containing 20 wt% bioactive glass fillers, and two conventional resin composites (3M Filtek Supreme XTE, Ceram.x Spectra ST), and aged by thermal cycling in artificial saliva (5000 cycles, 5-55 °C). Substrate surfaces were sandblasted (AlO, 50 µm), silanized (Monobond Plus), and repaired using adhesive (OptiBond FL) and universal resin composite (Ceram.x Spectra ST). After further thermal cycling, micro-tensile repair bond strength was assessed and analyzed using one-way ANOVA followed by Tukey's post hoc test. Failure modes were determined by stereomicroscopy (25× magnification) and statistically compared among the groups. Highest mean repair bond strength values were obtained for ACTIVA BioACTIVE-RESTORATIVE, Beautifil II, and 3M Filtek Supreme XTE (53.8, 46.2, and 43.0 MPa, respectively), which did not differ significantly among each other. ACTIVA BioACTIVE-RESTORATIVE attained significantly higher bond strength than the experimental composite, Ceram.x Spectra ST, and Cention Forte, and showed the highest incidence of cohesive failures (40%). No significant bond strength differences were detected among Beautifil II, 3M Filtek Supreme XTE, experimental composite, Ceram.x Spectra ST, and Cention Forte (36.2-46.2 MPa). In conclusion, ion-releasing resin composites can be repaired with conventional universal composite and show repair bond strength values at least as high as those of conventional composite materials. n 2 3
Source: https://pubmed.ncbi.nlm.nih.gov/41900565/